Insulation Company in Highland — Same-Day Service, Done Right the First Time

Insulation Company in Highland, CA

Blown in insulation is the most common request we field from Highland homeowners, and for good reason. Most houses here were built between the 1950s and 1980s, which means attics carrying thin, settled fiberglass that was barely adequate when it went in and is now decades past its useful performance. Highland sits at the base of the San Bernardino Mountains on the hot east side of the Inland Empire, where attic temperatures routinely climb past 140 degrees in July and August. That heat pushes down into living spaces and forces air conditioners to run almost continuously. We solve that by adding loose-fill insulation to the depth the home actually needs, and by sealing the gaps that let that superheated attic air migrate into the rooms below. If your upstairs rooms or the back of the house stay warm no matter how low you set the thermostat, call us at (855) 382-3451. Thermal Insulation Co has served Highland since 2012, and we work here every week.

Call (855) 382-3451

Why Highland Homes Are Different

Highland’s insulation needs run counter to what most people assume about insulation. This is not a heating climate. Winter lows rarely dip below the low 40s, and heating demand is modest at best. The real enemy is radiant heat gain from May through October, when the sun beats down on dark composition shingle roofs and turns attics into ovens. Air conditioning accounts for the bulk of a Highland homeowner’s energy spend, and the single most effective way to reduce that spend is to stop heat at the attic floor before it ever reaches the conditioned space.

The housing stock reinforces this. Much of Highland is older single-story tract and ranch homes from the mid-20th century. These homes often have R-19 or less in the attic, and in many cases that original insulation has compressed to R-8 or R-10 after decades of settling. Newer subdivisions east of the core are built to modern code, but even those benefit from air sealing around ceiling penetrations and ductwork. Beyond temperature, there’s the smoke factor. During Santa Ana wind events and wildfire season, homeowners call us specifically to air-seal attics and close envelope gaps before smoke arrives, not because of cold. That fire-season-driven insulation pattern is something we see in foothill communities below the San Bernardino Mountains more than anywhere else in our service area. Tightening the thermal envelope here means filtering out dust and smoke intrusion from wind-driven events, which gives the work a second layer of practical value.

Our Main Highland Services

Most Highland homeowners reach out to us about one of two jobs: bringing an under-insulated attic up to current performance levels, or using spray foam to solve specific problems like inaccessible sloped ceilings, air leakage, and extreme heat in bonus rooms or converted garages.

Attic Insulation in Highland

Attic insulation is where we see the fastest payback in Highland, because the attic absorbs the brunt of the summer heat load. Most older Highland homes have settled or thin original insulation, and the fix is usually air sealing followed by adding blown-in insulation to the necessary depth, not tearing everything out. We inspect what’s there, measure the settled depth, identify air leaks around can lights, plumbing stacks, and top plates, and then build up from that baseline. For homes with accessible attics and decent existing material, this is often a half-day job. Read more about how we handle Attic Insulation in Highland.

Spray Foam Insulation in Highland

Spray foam solves problems that batts and loose-fill cannot, and Highland has plenty of those. Older ranch homes often have additions with flat or low-slope roofs where venting is poor and attic access is limited. Open-cell foam applied to the underside of the roof deck turns that space into a conditioned, semi-conditioned zone that no longer bakes. Closed-cell foam adds structural rigidity and acts as an air and vapor barrier, which matters during Santa Ana events when dust and smoke are actively being driven against the building envelope. We install both Icynene and Demilec foam systems, selected by application. See how we approach Spray Foam Insulation in Highland.

Blown In Insulation in Highland

Blown in insulation is the workhorse solution for Highland’s older attics. Most homes here from the 1950s through the 1980s were built with thin batt insulation that has since settled, shifted, or been disturbed by electricians, plumbers, and HVAC crews. The result is an attic that cannot hold back the 140-plus-degree heat that builds under the roof deck during a Highland summer. Adding loose-fill insulation on top of what’s there, combined with air sealing, restores the thermal barrier and gives the air conditioner a fighting chance. This is the fastest, most cost-effective improvement most Highland homeowners can make to cut cooling costs and even out room temperatures. If you want to understand the full scope of what this service covers across all our markets, see our Blown In Insulation page.

Cellulose Insulation

Signs you need it

You have high summer bills, rooms that feel hotter than the thermostat says, or existing attic insulation that looks thin and dusty when you pop your head up through the access hatch.

What it costs in Highland

Cellulose insulation in Highland typically lands between $1.25 and $2.75 per square foot of attic surface, depending on depth required, access, and whether air sealing is included.

How we do it

We air-seal penetrations, set depth markers, and blow GreenFiber recycled cellulose to the target R-value using a calibrated machine, fluffing it to prevent settling.

Blown In Attic Insulation

Signs you need it

Your attic has bare spots, your existing insulation is below the top of the joists, or you can feel heat radiating from the ceiling in the late afternoon.

What it costs in Highland

Blown in attic insulation in Highland typically costs $1.10 to $2.20 per square foot for the loose-fill material and installation, with most older ranch homes landing between $1,200 and $2,800 total depending on square footage and target depth.

How we do it

We confirm venting is working, seal bypasses, then blow loose-fill to a consistent depth across the entire attic floor, including over the garage if it shares a wall with living space.

Loose Fill Insulation

Signs you need it

You have an irregular attic with obstacles, low-clearance areas, or existing insulation that has settled into valleys between joists.

What it costs in Highland

Loose fill insulation in Highland runs $1.10 to $2.20 per square foot, with final price driven by attic accessibility and the depth needed to reach the recommended R-value for the Inland Empire climate.

How we do it

We remove or work around obstructions, lay depth markers at multiple points, and blow the material into bays and hard-to-reach corners for even coverage.

What Blown In Insulation Costs in Highland

Two things push blown in insulation prices up in Highland more than anything else: attic access and the condition of what’s already up there. Tight scuttle holes, low-slope ceilings, and attics cluttered with old ductwork or stored belongings slow the job down and require more setup. If air sealing is also needed, which it usually is on older Highland homes, that adds line-item cost but pays for itself in reduced air movement between the attic and the living space. Our quotes are upfront and itemized, so you know the full cost before we start.

Is blown in insulation worth it in Highland’s climate?

Yes. In Highland’s heat-dominated climate, every inch of attic insulation slows heat transfer downward into living spaces. Blown in insulation is the most practical way to add depth across an existing attic floor without tearing the house apart.

How long does blown in insulation last in Highland?

Cellulose and fiberglass loose-fill both perform for decades, but settling and attic disturbances reduce effective depth over time. In Highland, the bigger issue is dust and debris from Santa Ana winds working into the attic, which is why we check depth before topping up.

Brands We Service in Highland

We carry and install products from Owens Corning, Johns Manville, Knauf, and Rockwool, among others. Having multiple brands on hand lets us match the material to the application rather than selling whatever one product line happens to be. Most loose-fill materials are stocked locally in our Van Nuys yard, so Highland jobs rarely wait on shipment. See our brands for the full list.

Pricing for Insulation Company in Highland, CA

Neighborhoods We Serve in Highland

We work across all of Highland’s 92346 zip code, from the older tract neighborhoods near Baseline and Victoria to the newer subdivisions east of the core. Response time for most Highland calls is same-week, with same-day estimates available when our crews are already working in the area. We’re in Highland at least twice a week and can usually fit an inspection in within one to two business days.

• East Highlands
• Highland Village area
• Baseline corridor
• Greenspot Road area
• North Highland near the foothills

Service Area – Cities Near Highland

Thermal Insulation Co serves the entire east Inland Empire from our Van Nuys base, and Highland is a regular stop. We also cover San Bernardino, CA directly to the south and southwest, Muscoy, CA just across the city line, Redlands, CA to the east, and Loma Linda, CA southeast of town. If you’re in any of these communities, the same crew and pricing structure applies.

FAQs About Insulation Company in Highland