Fast, Reliable Spray Foam Insulation Across Hollywood
Spray foam insulation in Hollywood typically costs $2.50 to $6.00 per board foot installed, with most attic jobs in the 90028 area running $3,200 to $7,800 depending on square footage and whether we’re working around existing tenants. We respond to Hollywood calls same day or next morning, and our crews know the 1920s bungalow courts and hillside lots here better than any generalist contractor could. If you’re tired of rooms that bake by 3pm or tenants who complain about Sunset Blvd noise, call (855) 382-3451 and we’ll walk you through what your specific building actually needs.

Why Thermal Insulation Co Is Hollywood’s Preferred Spray Foam Insulation Company
Most insulation contractors in Los Angeles split their time across a dozen trades. We don’t. Thermal Insulation Co exists for one reason: insulation, installed correctly, matched to the building. That focus matters in Hollywood because the housing stock here is unlike almost anywhere else in the city. Courtyard apartments from the 1920s, hillside Spanish Revivals with no sheathing, post-war stucco boxes with tenants in place. Each one demands a different approach, and Ruben Castellano has spent years figuring out what actually works in these specific buildings rather than applying a one-size-fits-all playbook.
Our Hollywood customers repeatedly mention two things: we show up when we say we will, and we explain the “why” behind every recommendation. When a landlord on North Citrus Avenue needs to know whether open-cell or closed-cell foam makes sense for a guest-occupied unit, we walk through the moisture, sound, and cost tradeoffs before any work is scheduled. That’s the difference between a quote and a plan.
Because we’re based in Van Nuys, we can have a crew at your Hollywood property quickly. Emergency calls and short-window jobs get prioritized, which matters when a building has a gap between short-term rental guests and the clock is running.
Spray Foam Attic Insulation in Hollywood
Spray foam attic insulation in Hollywood is the single most effective upgrade for buildings that heat up fast under direct afternoon sun. Most attics in 90028 were built before modern insulation standards existed, which means radiant heat pours through the roof deck and into living spaces below. We spray open-cell foam directly against the underside of the roof deck to create an air barrier and thermal break in one pass. The typical attic here runs $3,200 to $6,500 for open-cell coverage, with closed-cell running higher due to material density.
Cooling-Load Work for Hillside Lots
Hillside homes above Franklin and Beachwood Canyon sit fully exposed to western afternoon sun. An attic that reaches 140°F by mid-July turns every room below it into an oven regardless of the AC setting. Spray foam on the roofline cuts that heat transfer dramatically. We often pair foam with air sealing around can lights and vent penetrations, because the small leaks matter as much as the big surfaces.
Short-Term Rental Scheduling
When a Hollywood apartment building runs units as short-term rentals, attic work has to be scheduled around guest calendars. Our crews work in tight windows, sometimes completing a single unit’s attic while guests are out for the day. We coordinate directly with property managers so the job doesn’t interrupt a stay or trigger a bad review.
Spray Foam Wall Insulation in Hollywood
Spray foam wall insulation in Hollywood usually means retrofitting wall cavities that were never insulated in the first place. The 1910s and 1920s courtyard apartments around 90028 have lath-and-plaster interiors and empty stud bays, so heat pours through walls all summer and noise from Hollywood Blvd and Sunset Blvd bleeds in all year. We inject or spray foam into those cavities, working from either the interior or exterior depending on what the building’s architectural committee allows. Wall retrofit jobs in Hollywood typically run $4 to $9 per square foot of wall area, so a single apartment unit might land between $2,800 and $6,000.
Working Around Lath and Plaster
We recently sprayed open-cell foam in the wall cavities of a 1926 Spanish Revival bungalow court on North Citrus Avenue, where the stucco exterior had no sheathing and the original lath-and-plaster interior needed to stay intact. Working with the building’s architectural review board, we matched the existing stucco color for the small patch jobs and scheduled the spray during a gap in the short-term rental calendar so guests were never disturbed. That job is how most Hollywood wall retrofits go: careful, coordinated, and done without gutting the character of the building.

Open Stud Bay Conditions
In the hillside and canyon edges of Hollywood, it’s common to find bungalows where stucco was applied directly over open stud bays with no sheathing at all. That changes how we spray, because the foam will expand directly against the backside of the stucco. Proper air sealing has to happen first, or foam pushes into unintended gaps and can crack the plaster-and-lath interior. This is exactly the kind of condition a generalist contractor misses and we catch immediately.
Trusted Brands We Service in Hollywood
We stock and install Icynene and Demilec spray foam products, plus we carry Owens Corning, Johns Manville, and GreenFiber for companion batt and blown-in work. We carry Icynene because its open-cell formula expands gently in older wall cavities, which matters when the plaster on the other side is a century old. We carry Demilec because its closed-cell foam delivers the highest R-value per inch when space is tight or moisture is a concern. Having multiple brands means we choose the foam for your Hollywood building, not the foam our supplier happens to have on the truck. If you want to understand more about Spray Foam Insulation as a method, we break down the options clearly.
Common Spray Foam Insulation Problems We See in Hollywood Homes
- Knob-and-tube wiring conflicts. 1920s wall cavities in Hollywood regularly still contain live knob-and-tube. Spray foam applied directly over this wiring creates overheating hazards and can fail inspection unless the wiring is isolated or rerouted first. We check for this before quoting, not after the foam is in.
- Plaster cracking from aggressive expansion. Closed-cell foam expands with real force. In a bungalow with plaster over open stud bays, that force can crack the interior finish if air sealing wasn’t done properly. We spec open-cell or adjust application rates for fragile walls.
- HOA and ARB violations on exterior patches. Many Hollywood courtyard buildings have strict rules about exterior color and texture. Closed-cell foam on an exterior wall often requires stucco patching afterward, and if the patched stucco doesn’t match, the HOA can require removal. We handle the matching ourselves and get approvals in writing before spraying.
- Short-term rental guest disruption. Spray foam has an odor during application and off-gassing period. In buildings running Airbnb or VRBO units, spraying during a guest stay is a fast way to get a complaint. We schedule around the calendar, not against it.
Pricing for Spray Foam Insulation in Hollywood, CA
Spray foam insulation in the 90028 ZIP code runs $2.50 to $6.00 per board foot, with the final number driven by foam type, cavity depth, and access conditions. A standard courtyard apartment attic lands between $3,200 and $6,500. A full wall retrofit for a single unit usually falls between $2,800 and $6,000. Closed-cell foam costs more per board foot than open-cell but delivers roughly double the R-value per inch, so the right choice depends on the building. For an exact quote on your Hollywood property, call (855) 382-3451. Estimates are free and specific to your building’s actual conditions.
We Also Serve Cities Near Hollywood
Our crews cover Hollywood and the surrounding neighborhoods, including Universal City, West Hollywood, Koreatown, and Echo Park. If your building sits on the border of any of these areas, the same scheduling and pricing applies. We often handle multiple units across a property owner’s portfolio in several of these neighborhoods in a single week.
Serving Hollywood, CA — Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Spray Foam Insulation in Hollywood
We isolate or reroute knob-and-tube wiring before spraying any foam into wall cavities. Spray foam in direct contact with old wiring can trap heat and create a fire hazard, and no legitimate inspection will pass that condition. Ruben Castellano and our crew check for knob-and-tube during the initial walkthrough, and if it’s present, we coordinate with a licensed electrician before insulation work begins. Call (855) 382-3451 if you suspect your building has original wiring and you want an honest assessment.
Yes, open-cell spray foam measurably reduces noise transmission through walls and ceilings, which matters for buildings facing Hollywood Blvd, Sunset Blvd, or any of the major east-west corridors through 90028. Open-cell foam has an open, porous structure that absorbs sound waves, so rooms facing the street get noticeably quieter after a wall cavity retrofit. For maximum noise reduction, we recommend combining wall foam with air sealing around windows and door frames. Call (855) 382-3451 to talk through your building’s noise exposure.
Many Hollywood courtyard apartments and condominium buildings have architectural review boards that must approve any work visible from the exterior, including stucco patches after wall insulation. We prepare the application, document the proposed color and texture matching, and schedule work only after written approval is in hand. Spraying without ARB approval can result in removal orders and fines. We’ve handled enough Hollywood ARB cases to know what gets passed and what triggers a rejection, and we write the application accordingly.
We schedule spray foam work during gaps in the short-term rental calendar, typically a two-to-four-day window between guest stays. Our crews work efficiently enough to complete a single unit’s attic or wall retrofit in that window, and we handle foam off-gassing so the unit is ready for the next guest. Property managers in Hollywood coordinate us directly with their booking calendars, and we’ve developed a process for confirming the window, completing the work, and clearing the space without any overlap with a guest stay.
Yes, spray foam works in open stud bay conditions, but the approach has to be adjusted. When stucco is applied directly over studs with no sheathing, we air seal the cavity first and then spray open-cell foam, which expands gently and won’t crack the exterior stucco. Closed-cell can work in these walls too, but it requires careful application control to avoid blowouts. This is a condition we see regularly in the Hollywood hills and one that demands a contractor who has actually done it, not one who is reading about it for the first time. Call (855) 382-3451 for a free assessment of your specific bungalow.
Written by Ruben Castellano, Owner at Thermal Insulation Co, serving Hollywood and greater Los Angeles.